Cool I know my RAM is messing up so I finally decided to purchase more RAM, rather than test each still by themselves I decided to just place them both.
Which leads me to now my mobo being the problem.
Then it started randomly crashing.
Storage: WD Black 7200 RPM 64MB Cache 2TB.
Exe210d1c, pC is 4670k 16GB Corsair Vengence 2133 RAM (used to be 8GB ill sniper).Space can be/is very scarce when it comes to RAM module fitment in the Intel NuCs.They finally figured out it was.Evga SuperNova 1200 P2, cooler Master HAF 932 Advanced, reply With" 03:29 PM #5 Also, the age, brand, and model # of your 650w PSU?The Hero VI manual recommends populating A1 B1 with two modules.Every couple of months my PC will blue screen a lot, sometimes 5 times a day sometimes every other day but eventually the problem goes away for a while and I won't bsod how to get free money on play store 2014 for a couple of months.If this solution works for you, please mark it).I received a replacement for the 2nd module from Kingston and tested it out and the errors returned.Storage: 2x Samsung 850 EVO 500GB.So it seems if it is the mobo all the slots play roulette online for money vegas are faulty.I've read people have basic paper tape with some success, but I'd be careful with this as it may not tolerate the level of heat generated by direct contact with the ram modules, and the introduction of adhesive is rather unfortunate.I switched it to the second (of 2) slots on my motherboard, and no errors.

Make sure to use plastic that can tolerate at least 90 degrees celsius without melting or deforming.
Have there been any reports with faulty slots on motherboards before?
I only have one RAM slot filled, so I ran Windows Memory Diagnostic, and I got a bunch of errors.
I've been having bsod errors on my system since may. .After removing the 2nd RAM module and running it all week with just the 1st one The errors seem to disappear.Place this piece of plastic between the module and the PCB beneath (make sure it does the welsh lottery NOT interfere with the module slot/socket and/or between the modules if using a set of two.After diagnosing the system and from the logs it was pointing towards. 11:06 AM #1, i've been experiencing an issue for quite some time now and I feel it's kinda odd as it comes and goes.I continued to send error reports to Microsoft when I rebooted, but I didn't get any information.Exe142460 C:p,100 12/9/2015 2:43ha hal.In my personal experience, the most common issue is when two double-sided modules are installed - there is tension and physical contact between the RAM modules due to the cramped space.Asus Maximus VI Hero 650w Gold PSU 980 ti, reply With" 05:17 AM #2, are you using XMP profile or manual memory bios settings?